diff --git a/include/configs/CPC45.h b/include/configs/CPC45.h
index a338af0..91d262a 100644
--- a/include/configs/CPC45.h
+++ b/include/configs/CPC45.h
@@ -48,7 +48,7 @@
 
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		9600
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 #define CONFIG_PREBOOT	"echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
 
@@ -89,60 +89,60 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 
 #if 1
-#define CFG_HUSH_PARSER		1	/* use "hush" command parser	*/
+#define CONFIG_SYS_HUSH_PARSER		1	/* use "hush" command parser	*/
 #endif
-#ifdef	CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 /* Print Buffer Size
  */
-#define CFG_PBSIZE	(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_LOAD_ADDR	0x00100000	/* Default load address		*/
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_LOAD_ADDR	0x00100000	/* Default load address		*/
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
 
-#define CFG_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
 
 #if defined(CONFIG_BOOT_ROM)
-#define CFG_FLASH_BASE		0xFF000000
+#define CONFIG_SYS_FLASH_BASE		0xFF000000
 #else
-#define CFG_FLASH_BASE		0xFF800000
+#define CONFIG_SYS_FLASH_BASE		0xFF800000
 #endif
 
-#define CFG_RESET_ADDRESS	0xFFF00100
+#define CONFIG_SYS_RESET_ADDRESS	0xFFF00100
 
-#define CFG_EUMB_ADDR		0xFCE00000
+#define CONFIG_SYS_EUMB_ADDR		0xFCE00000
 
-#define CFG_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
 
-#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
-#define CFG_MEMTEST_START	0x00004000	/* memtest works on		*/
-#define CFG_MEMTEST_END		0x02000000	/* 0 ... 32 MB in DRAM		*/
+#define CONFIG_SYS_MEMTEST_START	0x00004000	/* memtest works on		*/
+#define CONFIG_SYS_MEMTEST_END		0x02000000	/* 0 ... 32 MB in DRAM		*/
 
 /* Maximum amount of RAM.
  */
-#define CFG_MAX_RAM_SIZE	0x10000000
+#define CONFIG_SYS_MAX_RAM_SIZE	0x10000000
 
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
-#undef CFG_RAMBOOT
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
+#undef CONFIG_SYS_RAMBOOT
 #else
-#define CFG_RAMBOOT
+#define CONFIG_SYS_RAMBOOT
 #endif
 
 
@@ -152,48 +152,48 @@
 
 /* Size in bytes reserved for initial data
  */
-#define CFG_GBL_DATA_SIZE	128
+#define CONFIG_SYS_GBL_DATA_SIZE	128
 
-#define CFG_INIT_RAM_ADDR	0x40000000
-#define CFG_INIT_RAM_END	0x1000
-#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR	0x40000000
+#define CONFIG_SYS_INIT_RAM_END	0x1000
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 
 /*
  * NS16550 Configuration
  */
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
 
-#define CFG_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_REG_SIZE	1
 
-#define CFG_NS16550_CLK		get_bus_freq(0)
+#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
 
-#define CFG_NS16550_COM1	(CFG_EUMB_ADDR + 0x4500)
-#define CFG_NS16550_COM2	(CFG_EUMB_ADDR + 0x4600)
-#define DUART_DCR		(CFG_EUMB_ADDR + 0x4511)
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_EUMB_ADDR + 0x4500)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_EUMB_ADDR + 0x4600)
+#define DUART_DCR		(CONFIG_SYS_EUMB_ADDR + 0x4511)
 
 /*
  * I2C configuration
  */
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support */
 
-#define CFG_I2C_SPEED		100000 /* 100 kHz */
-#define CFG_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SPEED		100000 /* 100 kHz */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
 
 /*
  * RTC configuration
  */
 #define CONFIG_RTC_PCF8563
-#define CFG_I2C_RTC_ADDR	0x51
+#define CONFIG_SYS_I2C_RTC_ADDR	0x51
 
 /*
  * EEPROM configuration
  */
-#define CFG_I2C_EEPROM_ADDR		0x58
-#define CFG_I2C_EEPROM_ADDR_LEN		1
-#define CFG_EEPROM_PAGE_WRITE_BITS	4
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x58
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
 
 /*
  * Low Level Configuration Settings
@@ -203,48 +203,48 @@
  */
 
 #define CONFIG_SYS_CLK_FREQ	33000000
-#define CFG_HZ			1000
+#define CONFIG_SYS_HZ			1000
 
 
 /* Bit-field values for MCCR1.
  */
-#define CFG_ROMNAL		0
-#define CFG_ROMFAL		8
+#define CONFIG_SYS_ROMNAL		0
+#define CONFIG_SYS_ROMFAL		8
 
-#define CFG_BANK0_ROW		0	/* SDRAM bank 7-0 row address */
-#define CFG_BANK1_ROW		0
-#define CFG_BANK2_ROW		0
-#define CFG_BANK3_ROW		0
-#define CFG_BANK4_ROW		0
-#define CFG_BANK5_ROW		0
-#define CFG_BANK6_ROW		0
-#define CFG_BANK7_ROW		0
+#define CONFIG_SYS_BANK0_ROW		0	/* SDRAM bank 7-0 row address */
+#define CONFIG_SYS_BANK1_ROW		0
+#define CONFIG_SYS_BANK2_ROW		0
+#define CONFIG_SYS_BANK3_ROW		0
+#define CONFIG_SYS_BANK4_ROW		0
+#define CONFIG_SYS_BANK5_ROW		0
+#define CONFIG_SYS_BANK6_ROW		0
+#define CONFIG_SYS_BANK7_ROW		0
 
 /* Bit-field values for MCCR2.
  */
 
-#define CFG_REFINT		0x2ec
+#define CONFIG_SYS_REFINT		0x2ec
 
 /* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.
  */
-#define CFG_BSTOPRE		160
+#define CONFIG_SYS_BSTOPRE		160
 
 /* Bit-field values for MCCR3.
  */
-#define CFG_REFREC		2	/* Refresh to activate interval		*/
-#define CFG_RDLAT		0	/* Data latancy from read command	*/
+#define CONFIG_SYS_REFREC		2	/* Refresh to activate interval		*/
+#define CONFIG_SYS_RDLAT		0	/* Data latancy from read command	*/
 
 /* Bit-field values for MCCR4.
  */
-#define CFG_PRETOACT		2	/* Precharge to activate interval	*/
-#define CFG_ACTTOPRE		5	/* Activate to Precharge interval	*/
-#define CFG_SDMODE_CAS_LAT	2	/* SDMODE CAS latancy			*/
-#define CFG_SDMODE_WRAP		0	/* SDMODE wrap type			*/
-#define CFG_SDMODE_BURSTLEN	2	/* SDMODE Burst length			*/
-#define CFG_ACTORW		2
-#define CFG_REGISTERD_TYPE_BUFFER 1
-#define CFG_EXTROM		0
-#define CFG_REGDIMM		0
+#define CONFIG_SYS_PRETOACT		2	/* Precharge to activate interval	*/
+#define CONFIG_SYS_ACTTOPRE		5	/* Activate to Precharge interval	*/
+#define CONFIG_SYS_SDMODE_CAS_LAT	2	/* SDMODE CAS latancy			*/
+#define CONFIG_SYS_SDMODE_WRAP		0	/* SDMODE wrap type			*/
+#define CONFIG_SYS_SDMODE_BURSTLEN	2	/* SDMODE Burst length			*/
+#define CONFIG_SYS_ACTORW		2
+#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
+#define CONFIG_SYS_EXTROM		0
+#define CONFIG_SYS_REGDIMM		0
 
 /* Memory bank settings.
  * Only bits 20-29 are actually used from these vales to set the
@@ -253,79 +253,79 @@
  * address. Refer to the MPC8240 book.
  */
 
-#define CFG_BANK0_START		0x00000000
-#define CFG_BANK0_END		(CFG_MAX_RAM_SIZE - 1)
-#define CFG_BANK0_ENABLE	1
-#define CFG_BANK1_START		0x3ff00000
-#define CFG_BANK1_END		0x3fffffff
-#define CFG_BANK1_ENABLE	0
-#define CFG_BANK2_START		0x3ff00000
-#define CFG_BANK2_END		0x3fffffff
-#define CFG_BANK2_ENABLE	0
-#define CFG_BANK3_START		0x3ff00000
-#define CFG_BANK3_END		0x3fffffff
-#define CFG_BANK3_ENABLE	0
-#define CFG_BANK4_START		0x3ff00000
-#define CFG_BANK4_END		0x3fffffff
-#define CFG_BANK4_ENABLE	0
-#define CFG_BANK5_START		0x3ff00000
-#define CFG_BANK5_END		0x3fffffff
-#define CFG_BANK5_ENABLE	0
-#define CFG_BANK6_START		0x3ff00000
-#define CFG_BANK6_END		0x3fffffff
-#define CFG_BANK6_ENABLE	0
-#define CFG_BANK7_START		0x3ff00000
-#define CFG_BANK7_END		0x3fffffff
-#define CFG_BANK7_ENABLE	0
+#define CONFIG_SYS_BANK0_START		0x00000000
+#define CONFIG_SYS_BANK0_END		(CONFIG_SYS_MAX_RAM_SIZE - 1)
+#define CONFIG_SYS_BANK0_ENABLE	1
+#define CONFIG_SYS_BANK1_START		0x3ff00000
+#define CONFIG_SYS_BANK1_END		0x3fffffff
+#define CONFIG_SYS_BANK1_ENABLE	0
+#define CONFIG_SYS_BANK2_START		0x3ff00000
+#define CONFIG_SYS_BANK2_END		0x3fffffff
+#define CONFIG_SYS_BANK2_ENABLE	0
+#define CONFIG_SYS_BANK3_START		0x3ff00000
+#define CONFIG_SYS_BANK3_END		0x3fffffff
+#define CONFIG_SYS_BANK3_ENABLE	0
+#define CONFIG_SYS_BANK4_START		0x3ff00000
+#define CONFIG_SYS_BANK4_END		0x3fffffff
+#define CONFIG_SYS_BANK4_ENABLE	0
+#define CONFIG_SYS_BANK5_START		0x3ff00000
+#define CONFIG_SYS_BANK5_END		0x3fffffff
+#define CONFIG_SYS_BANK5_ENABLE	0
+#define CONFIG_SYS_BANK6_START		0x3ff00000
+#define CONFIG_SYS_BANK6_END		0x3fffffff
+#define CONFIG_SYS_BANK6_ENABLE	0
+#define CONFIG_SYS_BANK7_START		0x3ff00000
+#define CONFIG_SYS_BANK7_END		0x3fffffff
+#define CONFIG_SYS_BANK7_ENABLE	0
 
-#define CFG_ODCR		0xff
-#define CFG_PGMAX		0x32	/* how long the 8240 retains the	*/
+#define CONFIG_SYS_ODCR		0xff
+#define CONFIG_SYS_PGMAX		0x32	/* how long the 8240 retains the	*/
 					/* currently accessed page in memory	*/
 					/* see 8240 book for details		*/
 
-#define CFG_IBAT0L  (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT0U  (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT0L  (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U  (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 
-#define CFG_IBAT1L  (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT1U  (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT1L  (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT1U  (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
 
-#define CFG_IBAT2L  (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT2U  (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT2L  (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT2U  (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 
-#define CFG_IBAT3L  (0xFC000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT3U  (0xFC000000 | BATU_BL_64M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT3L  (0xFC000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT3U  (0xFC000000 | BATU_BL_64M | BATU_VS | BATU_VP)
 
-#define CFG_DBAT0L  CFG_IBAT0L
-#define CFG_DBAT0U  CFG_IBAT0U
-#define CFG_DBAT1L  CFG_IBAT1L
-#define CFG_DBAT1U  CFG_IBAT1U
-#define CFG_DBAT2L  CFG_IBAT2L
-#define CFG_DBAT2U  CFG_IBAT2U
-#define CFG_DBAT3L  CFG_IBAT3L
-#define CFG_DBAT3U  CFG_IBAT3U
+#define CONFIG_SYS_DBAT0L  CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U  CONFIG_SYS_IBAT0U
+#define CONFIG_SYS_DBAT1L  CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U  CONFIG_SYS_IBAT1U
+#define CONFIG_SYS_DBAT2L  CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U  CONFIG_SYS_IBAT2U
+#define CONFIG_SYS_DBAT3L  CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U  CONFIG_SYS_IBAT3U
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* Max number of flash banks		*/
-#define CFG_MAX_FLASH_SECT	39	/* Max number of sectors in one bank	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* Max number of flash banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	39	/* Max number of sectors in one bank	*/
 #define INTEL_ID_28F160F3T	0x88F388F3	/*  16M = 1M x 16 top boot sector	*/
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
 	/* Warining: environment is not EMBEDDED in the ppcboot code.
 	 * It's stored in flash separately.
 	 */
 #define CONFIG_ENV_IS_IN_FLASH	    1
 
-#define CONFIG_ENV_ADDR		(CFG_FLASH_BASE + 0x7F8000)
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x7F8000)
 #define CONFIG_ENV_SIZE		0x4000	/* Size of the Environment		*/
 #define CONFIG_ENV_OFFSET		0	/* starting right at the beginning	*/
 #define CONFIG_ENV_SECT_SIZE	0x8000 /* Size of the Environment Sector	*/
@@ -333,9 +333,9 @@
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32
+#define CONFIG_SYS_CACHELINE_SIZE	32
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
 /*
@@ -472,7 +472,7 @@
 #define CONFIG_NET_MULTI		/* Multi ethernet cards support		*/
 
 #define CONFIG_EEPRO100
-#define CFG_RX_ETH_BUFFER	8	/* use 8 rx buffer on eepro100	*/
+#define CONFIG_SYS_RX_ETH_BUFFER	8	/* use 8 rx buffer on eepro100	*/
 
 #define PCI_ENET0_IOADDR	0x82000000
 #define PCI_ENET0_MEMADDR	0x82000000
@@ -486,8 +486,8 @@
 
 #define CONFIG_I82365
 
-#define CFG_PCMCIA_MEM_ADDR	PCMCIA_MEM_BASE
-#define CFG_PCMCIA_MEM_SIZE	0x1000
+#define CONFIG_SYS_PCMCIA_MEM_ADDR	PCMCIA_MEM_BASE
+#define CONFIG_SYS_PCMCIA_MEM_SIZE	0x1000
 
 #define CONFIG_PCMCIA_SLOT_A
 
@@ -502,20 +502,20 @@
 #undef	CONFIG_IDE_RESET		/* reset for IDE not supported	*/
 #define	CONFIG_IDE_LED			/* LED   for IDE is  supported	*/
 
-#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
-#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
 
-#define CFG_ATA_DATA_OFFSET	CFG_PCMCIA_MEM_SIZE
+#define CONFIG_SYS_ATA_DATA_OFFSET	CONFIG_SYS_PCMCIA_MEM_SIZE
 
 /* Offset for normal register accesses	*/
-#define CFG_ATA_REG_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+#define CONFIG_SYS_ATA_REG_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 
 /* Offset for alternate registers	*/
-#define CFG_ATA_ALT_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x400)
+#define CONFIG_SYS_ATA_ALT_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x400)
 
 #define CONFIG_DOS_PARTITION